Χαρακτηριστικά
Τεχνικές πληροφορίες
Powerful DJ Moving-head
- Color system: 2 color wheels
- Color wheel 1 with 9 different, dichroic color filters and white
- Color wheel 2 with 6 different, dichroic color filters and white and additionally with correction-filters 3200 K and 6000 K and UV-filter
- Via the two correction filters, up to 64 different colors and semi-colors can be created
- Rainbow effect in both directions
- Gobo wheel 1 with 9 static metal gobos and open
- With gobo shake function for static gobos
- Gobo wheel 2 with 2 rotating metal gobos, 4 multicolor dichro gobos and open
- The rotating gobos can be interchanged
- Via the combination between dichro gobos and color wheel or multicolor dichro gobo even more color combinations possible
- High-speed rotating 3-facet prism
- Remotely controllable motorized focus
- Combined shutter/dimmer unit allowing very smooth dimming and strobo effect 1-10 flash per sec.
- Remotely switching of the lamp
- Macro function for rotating gobos/rotating prism combinations
- Black out while Head moving or gobo/color/prism changing
- Remotely controllable speed of Pan/Tilt movement for easy programming
- Remote reset function
- Silent fans cooling; remotely controllable speed of fans
- 16 DMX channels - 16-bit Pan/Tilt movement resolution
- 14 DMX channels - 8-bit Pan/Tilt movement resolution
- Pan movement range 530°
- Tilt movement range 280°
- Motorized multi-step zoom with three different apertures (15°, 18° and 22°)
- Steplessly adjustable iris
- Control board with 4-digit display for adjusting the DMX starting address
- For MSR 575/2 or MSR 575 lamp
- DMX control via every standard DMX controller
| Power supply: | 230 V AC, 50 Hz ~ |
| Power consumption: | 1000 W |
| DMX control channels: | 16/14 |
| DMX512 connection: | 3-pin XLR |
| Flash-rate: | 10 Hz |
| Number of colors: |
| Color-wheel 1: | 9 dichroic + white |
| Color-wheel 2: | 6 dichroic, 2 correction filters, UV-filter + white |
| 64 possible color combinations |
| Number of gobos: |
| Gobo-wheel 1: | 9 static metal-gobos + open |
| Gobo-wheel 2: | 2 rotating metal-gobos, 4 rotating multicolor-dichro-gobos + open |
| Outside diameter of the gobos: | 27 mm |
| Image diameter of the gobos: | 23 mm |
| Length of base (including handles): | 500 mm |
| Width: | 475 mm |
| Height (head horizontal): | 560 mm |
| Weight: | 35.5 kg |
Παρακολούθηση του προϊόντος
Ερωτήσεις για το προϊόν?
Επαρκές απόθεμα για 12 εβδομάδες
Χαρακτηριστικά
Τεχνικές πληροφορίες
Multi-function Moving Head
- With electronic ballast
- Lower heat emission with closed shutter due to reduced lamp power, resulting in longer lifetime of the lamp
- Color-wheel with 5 different, dichroic color filters and white and additionally with CTO and CTB correction-filters and UV-filter
- CMY color mixing for indefinite color variations
- Switchable color change (mode 1: only full colors, mode 2: color-change at every position)
- Rainbow effect with adjustable speed in both directions
- Slot-in system for exchanging gobos and color-filters without tools
- Gobo-wheel 1 with 6 rotating gobos plus open
- All gobos can be interchanged
- Gobo-wheel 2 with 7 static metal gobos plus open
- With gobo-shake function
- Effect-wheel with rotating 3-facet prism, 3D prism and frost-filter
- Macro-function for rotating gobos/rotating prism combinations
- Motorized focus
- Mechanic dimmer
- Steplessly adjustable iris
- LCD-display
- Strobe effect with 1-13 flashes per second via shutter
- Random strobe effect
- Exact positioning via 16 bit Pan/Tilt movement resolution
- PAN-angle switchable between 630° and 540°
- Control board with LCD-display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off, operating hours
- DMX-controlled operation or stand-alone operation with Master/Slave function
- 56 preprogrammed scenes in Program Run for stand-alone operation
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- 7 built-in programs can be called up via DMX controller
- Sound-controlled via built-in microphone
- For MSR 300SA/SE GOLD FASTFIT lamp
- DMX control via every standard DMX controller
| Power supply: | 230 V AC, 50 Hz ~ |
| Power consumption: | 500 W |
| DMX control channels: | 21 |
| DMX512 connection: | 3-pin XLR |
| Beam angle: | 21° |
| Flash-rate: | 13 Hz |
| Color-system: | CMY color-mixture |
| Color-wheel: | 5 dichroic plus white, CTO and CTB correction-filters, UV-filter |
| Rotating gobo-wheel: | 6 gobos and open |
| Static gobo-wheel: | 7 gobos and open |
| Outside diameter of the gobos: | 27 mm |
| Image diameter of the gobos: | 23 mm |
| Maximum PAN-movement 630°: | in 3.5 s |
| Maximum TILT-movement 265°: | in 2.5 s |
| Length of base (including handles): | 350 mm |
| Width of yoke: | 420 mm |
| Height (head horizontal): | 510 mm |
| Weight: | 26.5 kg |
Παρακολούθηση του προϊόντος
Ερωτήσεις για το προϊόν?
Επαρκές απόθεμα για 12 εβδομάδες
Χαρακτηριστικά
Τεχνικές πληροφορίες
Multi-function Moving Head
- With electronic ballast
- Color-wheel with 8 different, dichroic color filters and white
- CMY color mixing for indefinite color variations
- Switchable color change (mode 1: only full colors, mode 2: color-change at every position)
- Rainbow effect with adjustable speed in both directions
- Slot-in system for exchanging gobos and color-filters without tools
- Two gobo-wheels with 6 rotating gobos plus open each
- All gobos can be interchanged
- With gobo-shake function
- Preprogrammed prism-gobo-macros
- 3-facet prism
- Stepless frost-filter for fading the projections in or out
- Animation-wheel for fire effect
- Motorized focus
- Mechanic dimmer
- Steplessly adjustable iris
- Lightbeam with 15°-30° radiation angle
- Colored LCD-display
- Strobe effect with 1-13 flashes per second via shutter
- Random strobe effect
- Exact positioning via 16 bit Pan/Tilt movement resolution
- PAN-angle switchable between 630° and 540°
- Control board with LCD-display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off, operating hours
- DMX-controlled operation or stand-alone operation with Master/Slave function
- 56 preprogrammed scenes in Program Run for stand-alone operation
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- 7 built-in programs can be called up via DMX controller
- Sound-controlled via built-in microphone
- For MSR 700SA/DE GOLD lamp
- DMX control via every standard DMX controller
| Power supply: | 230 V AC, 50 Hz ~ |
| Power consumption: | 975 W |
| DMX control channels: | 24 |
| DMX512 connection: | 5-pin and 3-pin XLR |
| Flash-rate: | 13 Hz |
| Color-system: | CMY color-mixture |
| Color-wheel: | 8 dichroic + white |
| Rotating gobo-wheel 1: | 6 gobos and open |
| Rotating gobo-wheel 2: | 6 gobos and open |
| Outside diameter of the gobos: | 27 mm |
| Image diameter of the gobos: | 23 mm |
| Maximum PAN-movement 630°: | in 3.5 s |
| Maximum TILT-movement 265°: | in 2.5 s |
| Length of base (including handles): | 475 mm |
| Width of yoke: | 355 mm |
| Height (head horizontal): | 520 mm |
| Weight: | 30.5 kg |
Παρακολούθηση του προϊόντος
Ερωτήσεις για το προϊόν?
Επαρκές απόθεμα για 12 εβδομάδες
Χαρακτηριστικά
Τεχνικές πληροφορίες
High-Power Beam with Philips Platinum 15R lamp and the multifunctionality of Moving Heads
- Double lamp lifetime with half power input and smaller dimensions compared to a 700 W lamp
- With integrated wireless receiver for WDMX operation
- Supports RDM (Remote Device Management)
- Very narrow illumination angle
- Light beam is centered and moved exactly
- Color-wheel with 6 different, dichroic color filters and white and additionally with CTO correction filter and UV filter
- Switchable color change (mode 1: only full colors, mode 2: color-change at every position)
- 14, 16 or 22 DMX channels selectable
- Rainbow effect with adjustable speed in both directions
- Gobo-wheel with 13 static metal gobos plus open
- Gobo-wheel with 8 rotating gobos plus open
- Slot-in gobo-system for exchanging gobos without tools
- With gobo-shake function
- Rotating 3-facet prism
- Macro-function for rotating gobos/rotating prism combinations
- Motorized focus
- Strobe effect with 1-13 flashes per second
- Random strobe effect
- Frost-filter
- Mechanic dimmer
- Exact positioning via 16 bit resolution: color-wheel, gobo indexing, prism indexing, focus, dimmer and PAN/TILT movement
- Automatic position correction
- Switch-mode power supply
- Automatic power supply adaption between 100 and 240 Volts without power selector
- ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc.
- Control board with graphic LCD display and touch keyboard for adjusting the DMX-starting address, PAN/TILT reverse, program, reset, lamp on/off, operating hours
- PAN-angle switchable between 630° and 540°
- DMX-controlled operation or stand-alone operation with master/slave function
- 7 built-in programs can be called up via DMX-controller
- 56 preprogrammed scenes in Program Run for stand alone operation
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- Sound-controlled via built-in microphone
- With PHILIPS MSD Platinum 15R discharge lamp
- The integral mounting plate on the bottom of the device enables a permanent installation even without omega clamps, e.g. on the ceiling
- Power connection via Neutrik PowerCon jack and included power cable
- DMX-control via every standard DMX-controller
| Power supply: | 100-240 V AC, 50/60 Hz ~ |
| Power consumption: | 490 W/500 VA |
| DMX control channels: | 14/16/22 |
| DMX512/RDM connection: | 5-pin and 3-pin XLR |
| Flash-rate: | 13 Hz |
| Color-wheel: | 6 dichroic plus white, CTO correction filter, UV filter |
| Static gobo wheel: | 13 gobos and open |
| Rotating gobo wheel: | 8 gobos and open |
| Outside diameter of the gobos: | 14 mm |
| Image diameter of the gobos: | 6 mm |
| Maximum PAN-movement 630°: | in 1.5 s |
| Maximum TILT-movement 270°: | in 1.0 s |
| Beam angle: | 5° |
| Length of base (including handles): | 385 mm |
| Width of yoke: | 329 mm |
| Height (head horizontal): | 486 mm |
| Weight: | 21.5 kg |
Παρακολούθηση του προϊόντος
Ερωτήσεις για το προϊόν?
Χαρακτηριστικά
Τεχνικές πληροφορίες
High-Power Beam with Osram Sirius HRI 230W lamp and LED ring with RGB color mixture
- With integrated wireless receiver for WDMX operation
- Supports RDM (Remote Device Management)
- 21, 23 or 24 DMX channels selectable
- Very narrow beam angle
- Light beam is centered exactly
- Color wheel with 14 different dichroic color filters plus white
- Rainbow effect with adjustable speed in both directions
- Effect wheel with rotating 3-facet prism and 8-facet prism and frost filter
- Gobo wheel with 8 rotating gobos plus open
- All gobos can be interchanged
- Slot-in gobo system for exchanging gobos without tools
- With gobo shake function
- Motorized focus
- Strobe effect with adjustable speed
- Random strobe effect
- Dimmer
- Exact positioning via 16 bit PAN/TILT movement resolution
- Automatic position correction
- Switch-mode power supply
- Automatic power supply adaption between 100 and 240 Volts without power selector
- Control board with graphic LCD display for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
- PAN-angle switchable between 630° and 540°
- DMX-controlled operation or stand-alone operation with master/slave function
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- Sound-controlled via built-in microphone
- With already installed Osram Sirius HRI 230 W lamp
- LED ring equipped with 12 x 3 W TCL (tricolor LED) with RGB colors
- Power connection via Neutrik PowerCon jack and included power cable
- Feed-through output allows to power another device
- After every 8 device the fixtures must have a renewed connection with the power mains
- DMX-control via every standard DMX-controller
| Power supply: | 100-240 V AC, 50/60 Hz ~ |
| Power consumption: | 325 W |
| DMX control channels: | 21/23/24 |
| DMX512 connection: | 5-pin and 3-pin XLR |
| Sound-control: | via built-in microphone |
| Flash-rate: | 20 Hz |
| Color-wheel: | 14 dichroic filters plus open |
| Rotating gobo-wheel: | 8 gobos and open |
| Outside diameter of the gobos: | 14 mm |
| Image diameter of the gobos: | 6 mm |
| Maximum PAN-movement: | 630° |
| Maximum TILT-movement: | 270° |
| Type of LEDs: | 3 W TCL |
| Number of LEDs: | 12 |
| Beam angle: | 1.3° |
| Dimensions (LxWxH): | 343 x 250 x 424 mm |
| Weight: | 15 kg |
Παρακολούθηση του προϊόντος
Ερωτήσεις για το προϊόν?
Επαρκές απόθεμα για 12 εβδομάδες
Τελευταία προϊόντα που έχετε δεί
Το προϊόν προστέθηκε στην λίστα ενδιαφέροντος
Λίστα επιλογών
Your request was successful sent.
βρείτε μας στο: