10451086
OMNITRONIC SMA-1500 Amplifier
Les photos de cet article sont en cours de chargement. Merci de patienter...
Cet article a été ajouté à votre liste d'articles à suivre
Pense bête

Suivre cet article
Question sur le produit?
Rechercher revendeur
OMNITRONIC
SMA-1500 Amplifier
Stereo PA amplifier with integrated limiter and SMPS 2 x 750 W/4 ohms
Art. n° 10451086
- Low weight and height due to integrated switch-mode power supply
- Temperature-controlled fan, particularly quiet during operation
- Limiter and speaker switch-on delay
- Switchable bass-boost at 80 Hz with 6 dB level increase
- 3 operating modes can be selected (stereo, parallel or bridged)
- Selectable input sensitivity
- 2 level controls
- 3 LEDs for each channel for activated protective circuit (protect) overload (clip) and signal
- 2 LEDs for parallel and bridge operation
- Complete protection set against short-circuit, overheat, DC voltage and VHF signals
- Electronically balanced inputs via XLR mounting jacks, with feed-through output (stereo RCA/6.3 mm jack)
- Speaker outputs via lockable Speaker plugs
- SMA-1500 and SMA-2000 with additional pairs of screw terminals for 8 ohms bridge operation
- Class 2 H circuitry
- Robust steel chassis
- Rack installation with 2 units
| Power supply: | 230 V AC, 50 Hz ~ |
| Power consumption: | 522 W (1/8 power) |
| Power output sine: | |
| stereo 4 ohms | 2 x 743 W |
| stereo 8 ohms | 2 x 480 W |
| 8 ohms bridged | 1 x 1500 W |
| Frequency range: | 20-20000 Hz, ± 0.5 dB |
| Damping factor: | >150 |
| Distortion factor: | 0.05 % |
| Slew rate: | >20 V/µsec |
| S/N ratio: | >90 dB |
| Channel seperation: | >70 dB/ 1 kHz |
| Input sensitivity: | 26 dB/32 dB (3.1 V/1.55 V), switchable |
| Voltage gain: | 26 dB/32 dB |
| Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
| Input connectors: | stereo XLR |
| Output connectors: | stereo Speaker, 2 pairs of screw terminals, feed-through output (stereo RCA, stereo 6.3 mm jack) |
| Circuitry: | class 2 H |
| Control elements: | power switch, level control per channel, mode switch (stereo/parallel/bridged), sensitivity selector, peak filter selector |
| LED indicators: | parallel, bridge (globally), protect, clip, signal (per channel) |
| Protection circuits: | short-circuit, overheat, DC voltage, VHF signals, softstart |
| Construction: | steel chassis |
| Dimensions (DxWxH): | 390 x 483 x 92 mm (19", 2 U) |
| Weight: | 9 kg |
| Conditionnement |
EAN |
Poids |
Dimensions |
| 1 |
4026397374124 |
12.100 kg |
60.5cm x 52cm x 19cm |
Articles alternatifs
Derniers articles consultés
Votre commande a bien été envoyée.
Trouvez nous sur: